WATER IN OIL DETECTOR

Water In Oil Detect

This Water In Oil(HW-2100) is the equipment to measure the Relative Content of Water in Fuel Oils and Lubricant
Oils used in Maritime Engines. HW-2100 is installed at the outlet pipe of a purifier(Separator) and measure relative
content of water in purified oil. The measured relative content of water is displayed on the indicator in real time.
HW-2100 is composed of a sensor module, an indicator and a cable assembly.
The measured result by the sensor module is transferred to the indicator by RS485.

Specification

Measuring Range : 0 ~ 1.60% (Relative Content of Water)

Measuring Error : 2.5% Full Scale

Display Resolution : 0.01%

Response time : 5 sec.

Output Signal : 4 ~ 20mA / Alarm (Dry-contact, COM-NO, 32V/1A) / RS485, RS422, CAN Communication (Option)

Sensor Module Operating Temperature Range : 0¡ÆC~110¡ÆC

Power Supply : DC24V

Alarm Limit : Default 0.3%, User-settable

Operating Temperature : 0¡ÆC~110¡ÆC

Ingress Protection : IP 65

WEATHER SYSTEM

 

INDUCTIVE CONDUCTIVITY SENSOR

Inductive Conductivity Sensor

This Inductive Conductivity Sensor(ICS-1000) is the equipment specially designed to measure the conductivity in
the solution. ICS-1000 sensor measures conductivity of seawater flowed through the certain pipe. The result of
measurement(Conductivity and Temperature) is indicated on the indicator(ICS-1000M). The indicator outputs
conductivity and temperature as the Current Loop of 4mA-20mA.
Data Communication is using RS485(NMEA0183) between ICS-1000 sensor and ICS-1000M indicator.

Specification

Measurement Range : 0mS/cm ~ 100mS/cm

Measurement Error : ¡Â 5% Max of measured value including Temperature Compensation

Current Output Error : ¡Â 2% of full measured range

Repeatability : ¡Â 1% of measurable full scale

Arrival Time for Target Temp: ¡Â 10 minutes

Output Signal : Current loop 4mA ~ 20mA (Default) / RS485 Communication (Option)

Power Supply : DC24V ( 18V ~ 30V)

Power Consumption : 5W Max

Operating Temperature : -10¡ÆC ~ 70¡ÆC

Operating Pressure range : 10 bar Max.

Ingress Protection : IP65

Electromagnetic Compatibility : Satisfied EN61326 rule